Item Description
Tube: Oil resistant Synthetic Rubber
Reinforcement: 2 W/B braid of High Tensile Steel Wire
Cover: Oil, weather and abrasion resistant Synthetic Rubber
Applications: Petroleum base hydraulic fluids and lubrication oils,
Water, Water/ Glycol and Water/ Oil emulsion, Hydraulic Fluids
Reinforcement: 2 W/B braid of High Tensile Steel Wire
Cover: Oil, weather and abrasion resistant Synthetic Rubber
Applications: Petroleum base hydraulic fluids and lubrication oils,
Water, Water/ Glycol and Water/ Oil emulsion, Hydraulic Fluids
Interchanges with:
- Weatherhead H425
- Aeroquip FC212
- Parker 301 or BXX
Use with: Braided Hose Crimp Fittings
Coil Length:
R2-1/4: ~350'
R2-3/8: ~350'
R2-1/2: ~175'
R2-3/4: ~180'
R2-1: ~160'
| Dash | ID | OD | Working Pressure | Burst Pressure | Min. B Radius | Weight |
| Size | Inch | Inch | PSI | PSI | Inch | lb/ft |
| -4 | 1/4 | .618 | 5801 | 23205 | 3.94 | .22 |
| -6 | 3/8 | .776 | 4786 | 19144 | 5.12 | .36 |
| -8 | 1/2 | .909 | 3988 | 15954 | 7.09 | .41 |
| -12 | 3/4 | 1.189 | 3118 | 12473 | 9.45 | .60 |
| -16 | 1 | 1.531 | 2393 | 9572 | 11.81 | .89 |
Hose and Fitting Supply has hydraulic rubber hoses to fit any application, including the movement of petroleum products. This SAE 100R2 AT rubber hydraulic hose is compatible with petroleum-based fluids, water/glycol emulsions, water/oil emulsions and other hydraulic fluids. To meet the SAE 100R2, it uses multi-layer construction that includes two wire braid reinforcements and an oil-, abrasion- and weather-resistant cover.
R2-1/4: ~350'
R2-3/8: ~350'
R2-1/2: ~175'
R2-3/4: ~180'
R2-1: ~160'
We offer this hose in five sizes, from ¼ to 1 inch. This hose interchanges with Weatherhead H425, Aeroquip FC212, Parker 301 and Parker BXX. While you’re ordering, don’t forget to pick up an SAE 100R2 hose.
R2-1/4: ~350'
R2-3/8: ~350'
R2-1/2: ~175'
R2-3/4: ~180'
R2-1: ~160'
